BLDC Belt Motor 6374 190KV 3250W for Electric Skateboard



Features

  • Wheel customizability:Can be used in DIY Electric Skateboard Electric Bike and Surfboard ect.
  • Powerful system : The Max Output Watt is 3250W, Max Current: 85 Amps,Max Volts: 12S .Recommend ESC is 3-12S 50A (eFSESC4.12 50A or FSESC 6.6 60A)
  • Decend design:Good finishing on the whole outer body to Enable Motors Dustproof , with sturdy shaft & Lamination Japan steel startor, used 12awg high strand silicone wire with 4.0mm gold bullet connectors.
  • Both support sensor and sensorless mode:Motor can be used with or without a sensor. Sensorless operation is most common. Internal PCB with 120 Degree Hall Effect Sensors.
  • High efficiency:This Motor Comes with Low KV( 190RPM/V), 8Nm High Torque to bring strong power.

Product Spec

  • Max Power: 3250 Watts
  • Max Current: 85 Amps
  • Max Volts: 12S 
  • Max Torque: 8Nm
  • Motor Resistance: 0.05Ohm
  • Recommend ESC: 3-12S 50A (FSESC4.12 50A or FSESC 6.6 60A)
  • Weight: 1.9 lb / 0.86 kg
  • The motor length:74mm
  • The motor diameter: 63mm
  • SHAFT: Diameter 8mm, 30mm length, 3x3x20mm keyway slot.
  • Motor Wire: 130mm silicone 12AWG wire with 4.0mm Gold Bullet Connector Male.
    • Wire configuration:
      • Blue = A
      • Black = B
      • Yellow = C
  • Stator: 0.2mm thickness lamination japan steel
  • Magnet: N42SH high temp curve magnet
  • BLDC Motor
  • The number of poles: 14

Sensor Wire: Standard RC Sensor Wire JST-ZH 6pin 1.5mm pitch

  • Internal PCB with 120 Degree Hall Effect Sensors.
  • Motor can be used with or without a sensor. Sensorless operation is most common.
  • VESC Sensor Wires required to use with VESC.

Shipping

  • 6374 190KV EPOWER Motor (Fits 63mm Motor Mount)
  • Two types of bottom ID design, will ship randomly

What's Our Product Feature?

  • Stator: Lamination Japan steel
  • 12awg high strand silicone wire with 4.0mm gold bullet connectors.
  • Both support sensor and sensorless mode! 

Reference Information

  • The screws used for the motor are M4 metric bolts. Using our motor mounts, we recommend using M4 Socket Cap bolts.
  •  Screws to mount the motor are not included with the motor.
  • The key for keyway is not included with motors for shipping
  • The mechanical diagram:

Related Items