Electric Skateboard Brushless Motor BLDC 5065 270KV 1550W



Product Features:

  • Stator: Lamination Japan steel
  • 12awg high strand silicone wire with 4.0mm gold bullet connectors.
  • Both support sensor and sensorless mode! 

Product Spec:

  • Max Power: 1550 Watts
  • Max Current: 80 Amps
  • No-load Current: 1.12A 10V
  • Max Volts: 41.5V
  • Lipo: 3S-8S (11.1V-29.6V)
  • Max Torque: 4Nm
  • Brushless Motor
  • Motor poles: 14
  • Motor Resistance: 64mΩ
  • Weight: 0.99 lb / 0.45 kg
  • The motor length:65mm
  • The motor diameter: 50mm
  • SHAFT: Diameter 8mm, 20mm length, 3x3x15mm keyway slot.
  • Motor Wire: 160mm silicone 16AWG wire with 4.0mm Gold Bullet Connector Male.
    • Wire configuration:
      • Blue(Heat shrinkable film) = A
      • Black (Heat shrinkable film)= B
      • Yellow (Heat shrinkable film)= C

Sensor Wire: Standard RC Sensor Wire JST-ZH 6pin 1.5mm pitch

  • Internal PCB with 120 Degree Hall Effect Sensors.
  • Motor can be used with or without a sensor. Sensorless operation is most common.
  • VESC Sensor Wires required to use with VESC.
  • Wire configuration:
    • Red = 5v
    • Blue = A
    • Yellow = C
    • Green = B
    • Black = GND
    WHAT'S INCLUDED
    •  5065 270KV EPOWER Motor (Fits 50mm Motor Mount)

    Reference Information:

    • The screws used for the motor are M4 metric bolts. Using our motor mounts, we recommend using M4 Socket Cap bolts. 
    •  Screws to mount the motor are not included with the motor.
    • The key for keyway is not included with motors for shipping
    • The mechanical diagram:

    Related Items