Dual FSESC6.6 Plus based on VESC6 | HGLTECH-FLIPSKY



Dual FSESC6.6 Plus(Pro switch) based on Dual FSESC6.6 

 

Upgraded features:

    • Pro switch version:
      • Power on/off by pressing the button
    • Added Can bus connector, be more convenient for 4WD set up
    • Changed the USB port soldering process to SMT soldering instead of manual soldering
    • Changed the big capacitors to SMT mounting capacitors, and add more mosfets in the bottom side.


      Spec:

      - Hardware: V 6.6

      - Firmware: Latest firmware version

      - Voltage: 8V - 60V (Safe for 3S to 12S LiPo) for the dual ESC

      - Voltage spikes may not exceed 60V

      - Current: Continuous 100A single, total 200A, Instantaneous current 400A per single, total 800A for system instantaneous current.

      - 5V 1.5A output for external electronics for single

      - 3.3V 1A output for external electronics for single

      - Modes: DC, BLDC, FOC (sinusoidal)

      - Supported sensors: ABI, HALL, AS5047

      -ERPM:150000

      -Size: 78x78x20mm including heatsink 

      Reminder: Detected battery voltage tolerance: +/-0.6V 

      The shipping package contains:

      • 1*Dual FSESC6.6+Heatsink
      • 2*VESC Sensor Wires
      • 1*LED button 
      • 1*Micro USB
      • 1*Manual

       

        Another detail spec is the same with Dual FSESC6.6, you can get more information by here:

        https://www.gd-hgl.com/products/dual-fsesc6-6-based-upon-vesc6

         

        Set Up diagram

        Flipsky Dual FSESC6.6 Plus pro set up diagram

        Set up for 4WD 

        Dual FSESC6.6 Plus pro for 4WD set up

        dual fsesc 6.6 plus size

        Programming Tutorial Reference (VESC tool 1.16)

        Remote in this video: 2.4Ghz Remote VX1 for DIY electric skateboard 

         


        Related Items